Introduction
The CPR Micromask with a removable/disposable,
filtered valve allows the professional rescuer to be prepared to give CPR
efficiently. Specifically designed to set the standard in the industry,
the CPR
Micromask features a positive, one-way, non-rebreathing valve complete
with 3M Filtrete filter. This valve has a large opening to reduce restrictive
rescue breathing.
Product
Overview and Description
The CPR Micromask is made of materials which remain flexible over a wide
range of temperatures, allowing it to conform to facial contours and provide
an outstanding seal, even under extreme conditions. The CPR Micromask features
a cushion inflation tube allowing the rescuer to adjust the cushion to the
desired shape and firmness. This adjustable cushion helps achieve a proper
seal for use on adults, children and infants. The dome is manufactured from
clear plastic for accurate victim monitoring allowing the rescuer to check
the victim's lip color and observe for secretions.
The ever popular fold-down styling makes for a low profile, easily accessible
package that includes a pair of disposable Nitrile gloves in a durable,
nylon belt pouch. The CPR Micromask is available as a single use disposable
mask or as a reusable mask with a single use disposable one-way valve.
Product
Use and Procedure
 |
Functional |
 |
Allows the rescuer
to provide air to the patient. |
|
One-way valve isolates
the rescuer from patient secretions and the filter provides a degree
of respirable particulate removal. |
|
Facemask is transparent
to allow the observation of the patient and provides an adequate seal
with minimum air leakage when held to the patient's face. |
|
For models with
removable valve, the facemask may be reused when sanitized as directed. |
|
Performance |
|
At a constant flow
of 60l/min, the valve with filter presents less than 10 cm H20/L/sec
resistance to airflow in either direction. |
|
Valve operation
is not impaired by vomitous. |
|
Will not be affected
after exposure to a temperature range of -21 degrees C to 49 degrees
C. |
|
The volume in the
system common to both inhale and exhale air is less than 200mls. |
Features
and Benefits
|
Adjustable
Air Cushion Seal-
easily conforms to the facial contours of adults, children and infants
while allowing the user to customize pressure to suit their individual
needs. |
| One-Way
Valve with Filter-
provides protection for both the rescuer and the victim. |
| Collapsible
Design-
opens easily from low-profile storage position to "ready to use". |
| Pre-Assembled
Components-
means no lost or contaminated parts and no field assembly. |
| Large
Valve Opening-
allows for greater airflow volume without creating restrictive back
pressure for the rescuer. |
| Belt
Pouch with Gloves-
provides carrying convenience. The durable nylon case features a zipper
closure and includes 1 pair of Nitrile gloves. |
| Adult,
Child, and Infant CPR-
compatibility is possible by a simple positioning of the nose portion
of the mask. |
| Replacement
Valves
are available for the CPR Micromask. |
Frequently
Asked Questions
| Q: |
Is
the mask reusable? |
| A: |
Yes, the Micromask
is reusable with proper cleaning. The one-way valve may be used for
repeated manikin training by a single individual, but must be discarded
after patient use.
|
| Q: |
How
is the mask cleaned? |
| A: |
Remove the one-way
valve and discard. Thoroughly cleanse the mask, removing all organic
matter and other residue. MDI recommends a high level disinfectant
with an EPA approved "hospital disinfectant", following
the manufacturer's instructions. Rinse and allow to air dry. When
mask is dry, attach a new one-way valve by inserting the valve into
the mask.
|
| Q: |
Can
it be used on infants and children? |
| A: |
Yes, The Micromask
is intended to provide a physical barrier for adults, children and
infants.
|
| Q: |
Does
it contain latex? |
| A: |
No, the Micromask
is latex free.
|
| Q: |
Can
it be used in extreme temperatures? |
| A: |
The Micromask will
not be affected after exposure to a temperature of -21 degrees C to
49 degrees C.
|
| Q: |
How
do you inflate or adjust the cushion? |
| A: |
Remove the plug
and inflate the mask cushion to the desired shape and firmness. Using
your finger, seal the bottom of the tube through the cushion, and
then replace the plug firmly.
|
| Q: |
Does
it come with an oxygen port? |
| A: |
School Health sells
the unit without an O2 port, however MDI makes a unit with a port.
If you are interested in that feature, contact School Health Corporation
to have the unit with the oxygen inlet special ordered.
|
| Q: |
What
is the benefit of the inflatable cushion? |
| A: |
It provides a positive
seal.
|
| Q: |
Does
the Micromask contain a one-way valve? |
| A: |
Yes |
Technical
Specifications
| FDA
Class |
| Class
II - Reg. # 868.5870 |
| CE
Class |
| Class
I Rule 1 |
| 510K |
| #K951483 |
| Description
of Components |
| Clear,
non-printed, vinyl dome material. The dome is marked "NOSE"
for proper placement on the patient. |
|
Valve fitting in the dome is compatible with the standard 22mm fitting. |
| The
filter is located on the rescuer side of the one-way-valve. |
|
The cushion/pillow/seal is re-inflatable by mouth. |
| Collapsed,
the mask measures approximately 2 3/4 " high X 4 3/4 " long
X 4 1/8 " wide with the cushion fully inflated. |
| Open,
the mask measures approximately 4" high X 4 3/4 " long X
4 1/8 " wide with the cushion fully inflated. |
| The
valve has a diameter of approximately 1" on the rescuer side.
The portion that is placed in the mask has an O.D. of approximately
22 mm and an I.D. of approximately 15 mm. |
| On
the top of the dome where the bottom of the valve is seated has material
that forms a grate to inhibit larger vomitous material from contacting
the valve. |
The
Mask is shipped fully assembled.
Product Ordering Information
| SH
Catalog # |
Product
Name |
| 55118 |
CPR
Micromask |
|
