Introduction
Welch Allyn has taken the concept of vital signs diagnostics and streamlined
the technology to introduce a fully automated, multi-use instrument at a
practical price. The Welch Allyn Spot Vital Signs
Monitor does a non-invasive blood pressure (NIBP) test using
the oscillometric method; takes pulse rate and mean arterial pressure; takes
oral, rectal and axillary temperatures using the Sure Temp Thermometer;
and tests Pulse Oximetry, SpO2 all within approximately 30 seconds. It is
lightweight with a convenient built-in handle. It is easy to learn and simple
to use. The automated Spot Vital Signs Monitor gives you more time to spend
on patient care.
Product
Use and Procedure
Welch Allyn's Spot
Vital Signs device delivers vital signs in seconds. The basic unit offers
noninvasive blood pressure, pulse rate and mean arterial pressure (MAP).
Spot Vital Signs additional parameters include SureTemp™ thermometry
and/or Nellcor® Pulse Oximetry. An optional external printer is available
for record keeping purposes. The following list shows the basic operation
and readings on a SPOT unit.
On/Off Button-
controls power to the device.
Print Button- Pressing
this button initiates print operation.
Mode Button- Pressing
this button down for 2 seconds turns backlight off/on. With temperature
probe removed from holder, pressing this button switches thermometer from
oral to auxiliary. To bring the Spot Vital Signs out of standby/sleep mode,
press this button.
Next Patient/Clear Button- Clears
all data from the device. Always press clear before taking vitals on a new
patient.
Blood Pressure Operation- To
take blood pressure measurement, press BP Start/Stop. Button. Press this
button again if you need to stop the blood pressure measurement.
Temperature Operation- Make
sure the appropriate temperature probe is connected to the device (Blue
= Oral/Axillary, Red = Rectal), remove probe from holder and apply a new
probe cover, properly place probe in mouth as directed in operator manual.
When done a single beep will be heard and temperature is displayed, eject
probe cover and return probe to holder.
SpO2 Operation- Apply
sensor to patient and insure adequate signal from pulse signal bar graph.
SpO2 measurement and pulse rate will update continuously for 10 minutes.
Error
Codes
When responding to an error code, always check the patient first and then
proceed to check the device.
Blood
Pressure Error Codes
| C02 |
Autozero
failure: Check for air obstruction, limit patient movement. |
| C03 |
Inflation
too rapid: Check for kinked hose or air obstruction. |
| C04 |
Excessive
inflation time: Check for air leaks. |
| C05 |
Excessive
noise: Check patient condition, cuff placement, limit patient movement. |
| C06 |
Measurement
outside of device's range: Check patient condition. |
| E10 |
Cuff
Overpressure: Check patient condition |
Temperature
Error Codes
| C20 |
Broken/Missing Probe:
Replace Probe
|
| P |
Loss of tissue contact:
Insure proper probe positioning.
|
| E0.2 |
Ambient Temperature
out of range: Adjust temperature or device location.
|
| E0.3 |
Ambient Temperature
out of range: Adjust temperature or device location.
|
| C22 |
10-minute diagnostic
limit exceeded: Check patient. Read operator manual. Be sure that
this device is not being used for monitoring purposes. |
SpO2 Error Codes
| C6 |
Sp02 heart rate
out of range.
|
| E7 |
Internal Malfunction:
Contact Customer Service.
|
| C9 |
10-minute diagnostic
limit exceeded: Check patient. Read operator manual. Be sure that
this device is not being used for monitoring purposes. |
General
Error Codes
| E11 |
Internal safety
violation: Check patient, contact Customer Service.
|
| C12 |
Ambient Temperature
out of range: Adjust temperature or device location.
|
| C13 |
Battery Failure:
Use wall transformer.
|
| E0.0-E9.9 |
Temperature Module
Malfunction: Contact Customer Service.
|
| E20-E50 |
General Internal
Malfunction: Contact Customer Service.
|
Features
and Benefits
 |
Affordable- Hospital-quality
automated vital signs at a breakthrough price. |
|
Simple & User-Friendly-
Easy and straightforward operation that insures consistent, accurate
measurements. |
|
Easy to Follow
Training Video- Have your staff trained to run Spot Vital Signs Monitor
in under 10 minutes! |
|
Upgradeable- Easily
upgradeable to meet your facilities changing needs. |
|
Modular/Multiparameter-
Choose the parameters to meet your facilities needs. |
|
Flexible Mounting
Options- Spot Vital Signs Monitor is available where and how you need
it! Carry it, or mount it on a mobile stand, I.V. Pole mount or wall
mount. |
|
Sure Temp Technology-
Accurate 4-second oral temperatures means increased efficiency. |
|
Increases Your Staff's
Speed & Efficiency- Results on NIBP, SpO2 and Temperature in 30
seconds. |
|
Nellcor Pulse Oximetry-
Accurate and durable SpO2 measurements with a wide variety of sensors. |
Frequently
Asked Questions
| Q: |
I
need a unit that is very portable and lightweight. How much does the
complete SPOT unit weigh? |
| A: |
The unit weighs
only 4 lbs and has a convenient built in handle making it very portable.
|
| Q: |
How
long does it take the battery to charge? |
| A: |
In normal situations
it takes about 8 hours for a full charge. If the battery is completely
drained, it takes about 12 hours.
|
| Q: |
How long will a fully charged battery last? |
| A: |
A fully charged
battery will last approximately 150 cycles.
|
| Q: |
Does
the SPOT contain the new motion tolerant SpO2 technology from Nellcor? |
| A: |
SPOT units manufactured
after mid-October of 2002 contain the Nellcor motion-tolerant MP506
sensor.
|
| Q: |
:
I do not need the Pulse Oximetry function in the SPOT unit, can it
be ordered without the Pulse Ox? |
| A: |
Yes! The SPOT can
be ordered in any configuration that meets your needs. Call the School
Health sales department to discuss the available configurations. |
| Q: |
I
want to use my SPOT unit to track results when I am taking my athletes'
vital stats during physicals. Is there a printer so I can print the
test results? |
| A: |
Yes. It is a wireless
printer that communicates remotely with the SPOT unit. You can order
this accessory from SH, catalog # 52-318. |
| Q: |
What
kind of disposable probe covers do I use with the Thermometer component? |
| A: |
The SPOT uses a
SureTemp thermometer disposable probe covers #21-178 or #21-177. They
can be ordered from SH Corporation. |
| Q: |
How
do I find out more about the SureTemp Thermometer used in the SPOT
unit? |
| A: |
Visit our product
education page on the SureTemp Thermometer by clicking here.
|
Technical
Specifications
The Welch Allyn DuraShock integrated aneroid sphygmomanometer
is accurate to ±3 mm Hg and conforms to applicable sections of
the following standards for aneroid sphygmomanometers:
| Dimensions: |
height:
9.70 in (24.64 cm) x length: 5.72 in (14.53 cm) x width: 4.73 in (12.01
cm) |
| Weight: |
4.25
lbs. (1.91 kg) |
| Blood
Pressure Accuracy: |
Meets
or exceeds SP10-1992 AAMI standards |
| Cuff
Pressure Range: |
0-300
mmHg |
| Systolic
Determination: |
Max:
250 mmHg Min: 60 mmHg |
| Diastolic
Determination: |
Max:
160 mmHg Min: 30 mmHg |
| Pulse
Rate Accuracy: |
SpO2
Module Heart Rate: +/- 3.0 bpm
Blood Pressure Algorithm: +/- 5.0 bpm
|
| Pulse
Rate Determination: |
Max:
245 bpm Min: 25 bpm |
| Temperature
Accuracy: |
Meets
or exceeds ASTM E112-86 standards |
| Pulse
Oximetry Accuracy: |
Nellcor
Puritan Bennett Pulse Oximeter Module: +/- 3% in the range of 70-100%
Oxygen saturation (1 standard deviation) < 70% unspecified by the
OEM |
| Power
Requirements: |
North
American Version: 120 VAC, 60 Hz
International Version: 230-240 VAC, 50 Hz
|
| Internal
Battery: |
Lead
Acid, with external charger |
Warranty
The Welch Allyn Spot Vital
Signs instrument is backed by a full two-year warranty on all parts and
labor. If warranty service is required, a loaner will be provided at no
charge.
Customer Testimonial
"We love the convenience.
Being able to automatically collect all the Vital Signs in a short amount
of time really frees up the nurses" - Laurie McGraw, RN (Minong,
WI).
Other
Information
To learn more about the
SPOT Vital Signs unit click
here to view a slide show about the unit on Welch Allyn's website.
Product
Ordering Information
|
